Struct std::io::BufReader

pub struct BufReader<R> { /* fields omitted */ }

The BufReader struct adds buffering to any reader.

It can be excessively inefficient to work directly with a Read instance. For example, every call to read on TcpStream results in a system call. A BufReader performs large, infrequent reads on the underlying Read and maintains an in-memory buffer of the results.

BufReader can improve the speed of programs that make small and repeated read calls to the same file or network socket. It does not help when reading very large amounts at once, or reading just one or a few times. It also provides no advantage when reading from a source that is already in memory, like a Vec<u8>.

When the BufReader is dropped, the contents of its buffer will be discarded. Creating multiple instances of a BufReader on the same stream can cause data loss.

Examples

use std::io::prelude::*;
use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f = File::open("log.txt")?;
    let mut reader = BufReader::new(f);

    let mut line = String::new();
    let len = reader.read_line(&mut line)?;
    println!("First line is {} bytes long", len);
    Ok(())
}

Methods

impl<R: Read> BufReader<R>

Important traits for BufReader<R>

impl<R: Read> Read for BufReader<R>

pub fn new(inner: R) -> BufReader<R>

Creates a new BufReader with a default buffer capacity. The default is currently 8 KB, but may change in the future.

Examples

use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f = File::open("log.txt")?;
    let reader = BufReader::new(f);
    Ok(())
}

Important traits for BufReader<R>

impl<R: Read> Read for BufReader<R>

pub fn with_capacity(capacity: usize, inner: R) -> BufReader<R>

Creates a new BufReader with the specified buffer capacity.

Examples

Creating a buffer with ten bytes of capacity:

use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f = File::open("log.txt")?;
    let reader = BufReader::with_capacity(10, f);
    Ok(())
}

impl<R> BufReader<R>

Important traits for &'_ mut F

impl<'_, F> Future for &'_ mut F where
    F: Unpin + Future + ?Sized,  type Output = <F as Future>::Output;impl<'_, I> Iterator for &'_ mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;impl<R: Read + ?Sized, '_> Read for &'_ mut Rimpl<W: Write + ?Sized, '_> Write for &'_ mut W

pub fn get_ref(&self) -> &R

Gets a reference to the underlying reader.

It is inadvisable to directly read from the underlying reader.

Examples

use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f1 = File::open("log.txt")?;
    let reader = BufReader::new(f1);

    let f2 = reader.get_ref();
    Ok(())
}

Important traits for &'_ mut F

impl<'_, F> Future for &'_ mut F where
    F: Unpin + Future + ?Sized,  type Output = <F as Future>::Output;impl<'_, I> Iterator for &'_ mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;impl<R: Read + ?Sized, '_> Read for &'_ mut Rimpl<W: Write + ?Sized, '_> Write for &'_ mut W

pub fn get_mut(&mut self) -> &mut R

Gets a mutable reference to the underlying reader.

It is inadvisable to directly read from the underlying reader.

Examples

use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f1 = File::open("log.txt")?;
    let mut reader = BufReader::new(f1);

    let f2 = reader.get_mut();
    Ok(())
}

Important traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]

pub fn buffer(&self) -> &[u8]

🔬 This is a nightly-only experimental API. (bufreader_buffer #45323)

Returns a reference to the internally buffered data.

Unlike fill_buf, this will not attempt to fill the buffer if it is empty.

Examples

use std::io::{BufReader, BufRead};
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f = File::open("log.txt")?;
    let mut reader = BufReader::new(f);
    assert!(reader.buffer().is_empty());

    if reader.fill_buf()?.len() > 0 {
        assert!(!reader.buffer().is_empty());
    }
    Ok(())
}

pub fn into_inner(self) -> R

Unwraps this BufReader, returning the underlying reader.

Note that any leftover data in the internal buffer is lost.

Examples

use std::io::BufReader;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let f1 = File::open("log.txt")?;
    let reader = BufReader::new(f1);

    let f2 = reader.into_inner();
    Ok(())
}

impl<R: Seek> BufReader<R>

pub fn seek_relative(&mut self, offset: i64) -> Result<()>

🔬 This is a nightly-only experimental API. (bufreader_seek_relative #31100)

Seeks relative to the current position. If the new position lies within the buffer, the buffer will not be flushed, allowing for more efficient seeks. This method does not return the location of the underlying reader, so the caller must track this information themselves if it is required.

Trait Implementations

impl<R: Read> Read for BufReader<R>

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer #42788)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>

Read the exact number of bytes required to fill buf.

Important traits for &'_ mut F

impl<'_, F> Future for &'_ mut F where
    F: Unpin + Future + ?Sized,  type Output = <F as Future>::Output;impl<'_, I> Iterator for &'_ mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;impl<R: Read + ?Sized, '_> Read for &'_ mut Rimpl<W: Write + ?Sized, '_> Write for &'_ mut W

fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 

Creates a "by reference" adaptor for this instance of Read.

Important traits for Bytes<R>

impl<R: Read> Iterator for Bytes<R> type Item = Result<u8>;

fn bytes(self) -> Bytes<Self> where
    Self: Sized, 

Transforms this Read instance to an [Iterator] over its bytes.

Important traits for Chain<T, U>

impl<T: Read, U: Read> Read for Chain<T, U>

fn chain<R: Read>(self, next: R) -> Chain<Self, R> where
    Self: Sized, 

Creates an adaptor which will chain this stream with another.

Important traits for Take<T>

impl<T: Read> Read for Take<T>

fn take(self, limit: u64) -> Take<Self> where
    Self: Sized, 

Creates an adaptor which will read at most limit bytes from it.

impl<R: Seek> Seek for BufReader<R>

fn seek(&mut self, pos: SeekFrom) -> Result<u64>

Seek to an offset, in bytes, in the underlying reader.

The position used for seeking with SeekFrom::Current(_) is the position the underlying reader would be at if the BufReader had no internal buffer.

Seeking always discards the internal buffer, even if the seek position would otherwise fall within it. This guarantees that calling .into_inner() immediately after a seek yields the underlying reader at the same position.

To seek without discarding the internal buffer, use BufReader::seek_relative.

See std::io::Seek for more details.

Note: In the edge case where you're seeking with SeekFrom::Current(n) where n minus the internal buffer length overflows an i64, two seeks will be performed instead of one. If the second seek returns Err, the underlying reader will be left at the same position it would have if you called seek with SeekFrom::Current(0).

fn stream_len(&mut self) -> Result<u64>

🔬 This is a nightly-only experimental API. (seek_convenience #59359)

Returns the length of this stream (in bytes).

fn stream_position(&mut self) -> Result<u64>

🔬 This is a nightly-only experimental API. (seek_convenience #59359)

Returns the current seek position from the start of the stream.

impl<R: Read> BufRead for BufReader<R>

fn fill_buf(&mut self) -> Result<&[u8]>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read.

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes into buf until the delimiter byte or EOF is reached.

fn read_line(&mut self, buf: &mut String) -> Result<usize>

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided buffer.

Important traits for Split<B>

impl<B: BufRead> Iterator for Split<B> type Item = Result<Vec<u8>>;

fn split(self, byte: u8) -> Split<Self> where
    Self: Sized, 

Returns an iterator over the contents of this reader split on the byte byte.

Important traits for Lines<B>

impl<B: BufRead> Iterator for Lines<B> type Item = Result<String>;

fn lines(self) -> Lines<Self> where
    Self: Sized, 

Returns an iterator over the lines of this reader.

impl<R> Debug for BufReader<R> where
    R: Debug, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.