1.0.0[−][src]Trait std::io::Write

pub trait Write {
    fn write(&mut self, buf: &[u8]) -> Result<usize>;

    fn flush(&mut self) -> Result<()>;

    fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize> { ... }

    fn write_all(&mut self, buf: &[u8]) -> Result<()> { ... }

    fn write_fmt(&mut self, fmt: Arguments) -> Result<()> { ... }

    fn by_ref(&mut self) -> &mut Self
    where
        Self: Sized,
    { ... }
}

A trait for objects which are byte-oriented sinks.

Implementors of the Write trait are sometimes called 'writers'.

Writers are defined by two required methods, write and flush:

Writers are intended to be composable with one another. Many implementors throughout std::io take and provide types which implement the Write trait.

Examples

use std::io::prelude::*;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let data = b"some bytes";

    let mut pos = 0;
    let mut buffer = File::create("foo.txt")?;

    while pos < data.len() {
        let bytes_written = buffer.write(&data[pos..])?;
        pos += bytes_written;
    }
    Ok(())
}Run

The trait also provides convenience methods like write_all, which calls write in a loop until its entire input has been written.

Required methods

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

This function will attempt to write the entire contents of buf, but the entire write may not succeed, or the write may also generate an error. A call to write represents at most one attempt to write to any wrapped object.

Calls to write are not guaranteed to block waiting for data to be written, and a write which would otherwise block can be indicated through an Err variant.

If the return value is Ok(n) then it must be guaranteed that 0 <= n <= buf.len(). A return value of 0 typically means that the underlying object is no longer able to accept bytes and will likely not be able to in the future as well, or that the buffer provided is empty.

Errors

Each call to write may generate an I/O error indicating that the operation could not be completed. If an error is returned then no bytes in the buffer were written to this writer.

It is not considered an error if the entire buffer could not be written to this writer.

An error of the ErrorKind::Interrupted kind is non-fatal and the write operation should be retried if there is nothing else to do.

Examples

use std::io::prelude::*;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut buffer = File::create("foo.txt")?;

    // Writes some prefix of the byte string, not necessarily all of it.
    buffer.write(b"some bytes")?;
    Ok(())
}Run

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

Errors

It is considered an error if not all bytes could be written due to I/O errors or EOF being reached.

Examples

use std::io::prelude::*;
use std::io::BufWriter;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut buffer = BufWriter::new(File::create("foo.txt")?);

    buffer.write_all(b"some bytes")?;
    buffer.flush()?;
    Ok(())
}Run
Loading content...

Provided methods

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize>1.36.0

Like write, except that it writes from a slice of buffers.

Data is copied to from each buffer in order, with the final buffer read from possibly being only partially consumed. This method must behave as a call to write with the buffers concatenated would.

The default implementation calls write with either the first nonempty buffer provided, or an empty one if none exists.

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer.

This method will continuously call write until there is no more data to be written or an error of non-ErrorKind::Interrupted kind is returned. This method will not return until the entire buffer has been successfully written or such an error occurs. The first error that is not of ErrorKind::Interrupted kind generated from this method will be returned.

Errors

This function will return the first error of non-ErrorKind::Interrupted kind that write returns.

Examples

use std::io::prelude::*;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut buffer = File::create("foo.txt")?;

    buffer.write_all(b"some bytes")?;
    Ok(())
}Run

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>

Writes a formatted string into this writer, returning any error encountered.

This method is primarily used to interface with the format_args! macro, but it is rare that this should explicitly be called. The write! macro should be favored to invoke this method instead.

This function internally uses the write_all method on this trait and hence will continuously write data so long as no errors are received. This also means that partial writes are not indicated in this signature.

Errors

This function will return any I/O error reported while formatting.

Examples

use std::io::prelude::*;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut buffer = File::create("foo.txt")?;

    // this call
    write!(buffer, "{:.*}", 2, 1.234567)?;
    // turns into this:
    buffer.write_fmt(format_args!("{:.*}", 2, 1.234567))?;
    Ok(())
}Run

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 

Creates a "by reference" adaptor for this instance of Write.

The returned adaptor also implements Write and will simply borrow this current writer.

Examples

use std::io::Write;
use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut buffer = File::create("foo.txt")?;

    let reference = buffer.by_ref();

    // we can use reference just like our original buffer
    reference.write_all(b"some bytes")?;
    Ok(())
}Run
Loading content...

Implementors

impl Write for File[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for Cursor<Box<[u8]>>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>1.0.0[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>1.0.0[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 1.0.0[src]

impl Write for Cursor<Vec<u8>>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for Sink[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for Stderr[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for Stdout[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for TcpStream[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for UnixStream[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>1.0.0[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>1.0.0[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 1.0.0[src]

impl Write for ChildStdin[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl Write for Vec<u8>[src]

Write is implemented for Vec<u8> by appending to the vector. The vector will grow as needed.

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for &'_ File[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for &'_ TcpStream[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for &'_ mut [u8][src]

Write is implemented for &mut [u8] by copying into the slice, overwriting its data.

Note that writing updates the slice to point to the yet unwritten part. The slice will be empty when it has been completely overwritten.

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for Cursor<&'_ mut Vec<u8>>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>1.0.0[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>1.0.0[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 1.0.0[src]

impl<'_> Write for Cursor<&'_ mut [u8]>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for StderrLock<'_>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'_> Write for StdoutLock<'_>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<'a> Write for &'a UnixStream[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>1.0.0[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>1.0.0[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, 1.0.0[src]

impl<W: Write + ?Sized> Write for Box<W>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<W: Write + ?Sized, '_> Write for &'_ mut W[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<W: Write> Write for BufWriter<W>[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

impl<W: Write> Write for LineWriter<W>[src]

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize>1.36.0[src]

fn write_all(&mut self, buf: &[u8]) -> Result<()>[src]

fn write_fmt(&mut self, fmt: Arguments) -> Result<()>[src]

ⓘImportant traits for &'_ mut F
fn by_ref(&mut self) -> &mut Self where
    Self: Sized, [src]

Loading content...