operator overloading
Customizes the C++ operators for operands of user-defined types.
Syntax
Overloaded operators are functions with special function names:
operator op
|
(1) | ||||||||
operator type
|
(2) | ||||||||
operator new operator new []
|
(3) | ||||||||
operator delete operator delete []
|
(4) | ||||||||
operator "" suffix-identifier
|
(5) | (since C++11) | |||||||
| op | - | any of the following 38 (until C++20)39 (since C++20) operators:+ - * / % ^ & | ~ ! = < > += -= *= /= %= ^= &= |= << >> >>= <<= == != <= >= <=> (since C++20) && || ++ -- , ->* -> ( ) [ ] |
Overloaded operators
When an operator appears in an expression, and at least one of its operands has a class type or an enumeration type, then overload resolution is used to determine the user-defined function to be called among all the functions whose signatures match the following:
| Expression | As member function | As non-member function | Example |
|---|---|---|---|
| @a | (a).operator@ ( ) | operator@ (a) | !std::cin calls std::cin.operator!() |
| a@b | (a).operator@ (b) | operator@ (a, b) | std::cout << 42 calls std::cout.operator<<(42) |
| a=b | (a).operator= (b) | cannot be non-member | std::string s; s = "abc"; calls s.operator=("abc") |
| a(b...) | (a).operator()(b...) | cannot be non-member | std::random_device r; auto n = r(); calls r.operator()() |
| a[b] | (a).operator[](b) | cannot be non-member | std::map<int, int> m; m[1] = 2; calls m.operator[](1) |
| a-> | (a).operator-> ( ) | cannot be non-member | auto p = std::make_unique<S>(); p->bar() calls p.operator->() |
| a@ | (a).operator@ (0) | operator@ (a, 0) | std::vector<int>::iterator i = v.begin(); i++ calls i.operator++(0) |
|
in this table, | |||
Note: for overloading user-defined conversion functions, user-defined literals, allocation and deallocation see their respective articles.
Overloaded operators (but not the built-in operators) can be called using function notation:
std::string str = "Hello, "; str.operator+=("world"); // same as str += "world"; operator<<(operator<<(std::cout, str) , '\n'); // same as std::cout << str << '\n'; // (since C++17) except for sequencing
Restrictions
- The operators
::(scope resolution),.(member access),.*(member access through pointer to member), and?:(ternary conditional) cannot be overloaded. - New operators such as
**,<>, or&|cannot be created. - The overloads of operators
&&and||lose short-circuit evaluation. - The overload of operator
->must either return a raw pointer, or return an object (by reference or by value) for which operator->is in turn overloaded. - It is not possible to change the precedence, grouping, or number of operands of operators.
|
(until C++17) |
Canonical implementations
Other than the restrictions above, the language puts no other constraints on what the overloaded operators do, or on the return type (it does not participate in overload resolution), but in general, overloaded operators are expected to behave as similar as possible to the built-in operators: operator+ is expected to add, rather than multiply its arguments, operator= is expected to assign, etc. The related operators are expected to behave similarly (operator+ and operator+= do the same addition-like operation). The return types are limited by the expressions in which the operator is expected to be used: for example, assignment operators return by reference to make it possible to write a = b = c = d, because the built-in operators allow that.
Commonly overloaded operators have the following typical, canonical forms:[1]
Assignment operator
The assignment operator (operator=) has special properties: see copy assignment and move assignment for details.
The canonical copy-assignment operator is expected to perform no action on self-assignment, and to return the lhs by reference:
// assume the object holds reusable storage, such as a heap-allocated buffer mArray T& operator=(const T& other) // copy assignment { if (this != &other) { // self-assignment check expected if (other.size != size) { // storage cannot be reused delete[] mArray; // destroy storage in this size = 0; mArray = nullptr; // preserve invariants in case next line throws mArray = new int[other.size]; // create storage in this size = other.size; } std::copy(other.mArray, other.mArray + other.size, mArray); } return *this; }
The canonical move assignment is expected to leave the moved-from object in valid state (that is, a state with class invariants intact), and either do nothing or at least leave the object in a valid state on self-assignment, and return the lhs by reference to non-const, and be noexcept:
T& operator=(T&& other) noexcept // move assignment { if(this != &other) { // no-op on self-move-assignment (delete[]/size=0 also ok) delete[] mArray; // delete this storage mArray = std::exchange(other.mArray, nullptr); // leave moved-from in valid state size = std::exchange(other.size, 0); } return *this; }
In those situations where copy assignment cannot benefit from resource reuse (it does not manage a heap-allocated array and does not have a (possibly transitive) member that does, such as a member std::vector or std::string), there is a popular convenient shorthand: the copy-and-swap assignment operator, which takes its parameter by value (thus working as both copy- and move-assignment depending on the value category of the argument), swaps with the parameter, and lets the destructor clean it up.
T& T::operator=(T arg) noexcept // copy/move constructor is called to construct arg { swap(arg); // resources are exchanged between *this and arg return *this; } // destructor of arg is called to release the resources formerly held by *this
This form automatically provides strong exception guarantee, but prohibits resource reuse.
Stream extraction and insertion
The overloads of operator>> and operator<< that take a std::istream& or std::ostream& as the left hand argument are known as insertion and extraction operators. Since they take the user-defined type as the right argument (b in a@b), they must be implemented as non-members.
std::ostream& operator<<(std::ostream& os, const T& obj) { // write obj to stream return os; } std::istream& operator>>(std::istream& is, T& obj) { // read obj from stream if( /* T could not be constructed */ ) is.setstate(std::ios::failbit); return is; }
These operators are sometimes implemented as friend functions.
Function call operator
When a user-defined class overloads the function call operator, operator(), it becomes a FunctionObject type. Many standard algorithms, from std::sort to std::accumulate accept objects of such types to customize behavior. There are no particularly notable canonical forms of operator(), but to illustrate the usage
struct Sum { int sum; Sum() : sum(0) { } void operator()(int n) { sum += n; } }; Sum s = std::for_each(v.begin(), v.end(), Sum());
Increment and decrement
When the postfix increment and decrement appear in an expression, the corresponding user-defined function (operator++ or operator--) is called with an integer argument 0. Typically, it is implemented as T operator++(int), where the argument is ignored. The postfix increment and decrement operator is usually implemented in terms of the prefix version:
struct X { X& operator++() { // actual increment takes place here return *this; } X operator++(int) { X tmp(*this); // copy operator++(); // pre-increment return tmp; // return old value } };
Although canonical form of pre-increment/pre-decrement returns a reference, as with any operator overload, the return type is user-defined; for example the overloads of these operators for std::atomic return by value.
Binary arithmetic operators
Binary operators are typically implemented as non-members to maintain symmetry (for example, when adding a complex number and an integer, if operator+ is a member function of the complex type, then only complex+integer would compile, and not integer+complex). Since for every binary arithmetic operator there exists a corresponding compound assignment operator, canonical forms of binary operators are implemented in terms of their compound assignments:
class X { public: X& operator+=(const X& rhs) // compound assignment (does not need to be a member, { // but often is, to modify the private members) /* addition of rhs to *this takes place here */ return *this; // return the result by reference } // friends defined inside class body are inline and are hidden from non-ADL lookup friend X operator+(X lhs, // passing lhs by value helps optimize chained a+b+c const X& rhs) // otherwise, both parameters may be const references { lhs += rhs; // reuse compound assignment return lhs; // return the result by value (uses move constructor) } };
Relational operators
Standard algorithms such as std::sort and containers such as std::set expect operator< to be defined, by default, for the user-provided types, and expect it to implement strict weak ordering (thus satisfying the Compare requirements). An idiomatic way to implement strict weak ordering for a structure is to use lexicographical comparison provided by std::tie:
struct Record { std::string name; unsigned int floor; double weight; friend bool operator<(const Record& l, const Record& r) { return std::tie(l.name, l.floor, l.weight) < std::tie(r.name, r.floor, r.weight); // keep the same order } };
Typically, once operator< is provided, the other relational operators are implemented in terms of operator<.
inline bool operator< (const X& lhs, const X& rhs){ /* do actual comparison */ } inline bool operator> (const X& lhs, const X& rhs){ return rhs < lhs; } inline bool operator<=(const X& lhs, const X& rhs){ return !(lhs > rhs); } inline bool operator>=(const X& lhs, const X& rhs){ return !(lhs < rhs); }
Likewise, the inequality operator is typically implemented in terms of operator==:
inline bool operator==(const X& lhs, const X& rhs){ /* do actual comparison */ } inline bool operator!=(const X& lhs, const X& rhs){ return !(lhs == rhs); }
When three-way comparison (such as std::memcmp or std::string::compare) is provided, all six relational operators may be expressed through that:
inline bool operator==(const X& lhs, const X& rhs){ return cmp(lhs,rhs) == 0; } inline bool operator!=(const X& lhs, const X& rhs){ return cmp(lhs,rhs) != 0; } inline bool operator< (const X& lhs, const X& rhs){ return cmp(lhs,rhs) < 0; } inline bool operator> (const X& lhs, const X& rhs){ return cmp(lhs,rhs) > 0; } inline bool operator<=(const X& lhs, const X& rhs){ return cmp(lhs,rhs) <= 0; } inline bool operator>=(const X& lhs, const X& rhs){ return cmp(lhs,rhs) >= 0; }
|
All six relational operators are automatically generated by the compiler if the three-way comparison operator operator<=> is defined, and that operator, in turn, is generated by the compiler if it is defined as defaulted: struct Record { std::string name; unsigned int floor; double weight; auto operator<=>(const Record&) = default; }; // records can now be compared with ==, !=, <, <=, >, and >= See default comparisons for details. |
(since C++20) |
Array subscript operator
User-defined classes that provide array-like access that allows both reading and writing typically define two overloads for operator[]: const and non-const variants:
struct T { value_t& operator[](std::size_t idx) { return mVector[idx]; } const value_t& operator[](std::size_t idx) const { return mVector[idx]; } };
If the value type is known to be a built-in type, the const variant should return by value.
Where direct access to the elements of the container is not wanted or not possible or distinguishing between lvalue c[i] = v; and rvalue v = c[i]; usage, operator[] may return a proxy. see for example std::bitset::operator[].
To provide multidimensional array access semantics, e.g. to implement a 3D array access a[i][j][k] = x;, operator[] has to return a reference to a 2D plane, which has to have its own operator[] which returns a reference to a 1D row, which has to have operator[] which returns a reference to the element. To avoid this complexity, some libraries opt for overloading operator() instead, so that 3D access expressions have the Fortran-like syntax a(i, j, k) = x;
Bitwise arithmetic operators
User-defined classes and enumerations that implement the requirements of BitmaskType are required to overload the bitwise arithmetic operators operator&, operator|, operator^, operator~, operator&=, operator|=, and operator^=, and may optionally overload the shift operators operator<< operator>>, operator>>=, and operator<<=. The canonical implementations usually follow the pattern for binary arithmetic operators described above.
Boolean negation operator
The operator operator! is commonly overloaded by the user-defined classes that are intended to be used in boolean contexts. Such classes also provide a user-defined conversion function explicit operator bool() (see std::basic_ios for the standard library example), and the expected behavior of operator! is to return the value opposite of operator bool.
Rarely overloaded operators
The following operators are rarely overloaded:
- The address-of operator, operator&. If the unary & is applied to an lvalue of incomplete type and the complete type declares an overloaded operator&, the behavior is undefined (until C++11) it is unspecified whether the operator has the built-in meaning or the operator function is called (since C++11). Because this operator may be overloaded, generic libraries use std::addressof to obtain addresses of objects of user-defined types. The best known example of a canonical overloaded operator& is the Microsoft class CComPtr. An example of its use in EDSL can be found in boost.spirit.
- The boolean logic operators, operator&& and operator||. Unlike the built-in versions, the overloads cannot implement short-circuit evaluation. Also unlike the built-in versions, they do not sequence their left operand before the right one. (until C++17) In the standard library, these operators are only overloaded for std::valarray.
- The comma operator, operator,. Unlike the built-in version, the overloads do not sequence their left operand before the right one. (until C++17) Because this operator may be overloaded, generic libraries use expressions such as a,void(),b instead of a,b to sequence execution of expressions of user-defined types. The boost library uses
operator,in boost.assign, boost.spirit, and other libraries. The database access library SOCI also overloadsoperator,. - The member access through pointer to member operator->*. There are no specific downsides to overloading this operator, but it is rarely used in practice. It was suggested that it could be part of smart pointer interface, and in fact is used in that capacity by actors in boost.phoenix. It is more common in EDSLs such as cpp.react.
Example
#include <iostream> class Fraction { int gcd(int a, int b) { return b == 0 ? a : gcd(b, a % b); } int n, d; public: Fraction(int n, int d = 1) : n(n/gcd(n, d)), d(d/gcd(n, d)) { } int num() const { return n; } int den() const { return d; } Fraction& operator*=(const Fraction& rhs) { int new_n = n * rhs.n/gcd(n * rhs.n, d * rhs.d); d = d * rhs.d/gcd(n * rhs.n, d * rhs.d); n = new_n; return *this; } }; std::ostream& operator<<(std::ostream& out, const Fraction& f) { return out << f.num() << '/' << f.den() ; } bool operator==(const Fraction& lhs, const Fraction& rhs) { return lhs.num() == rhs.num() && lhs.den() == rhs.den(); } bool operator!=(const Fraction& lhs, const Fraction& rhs) { return !(lhs == rhs); } Fraction operator*(Fraction lhs, const Fraction& rhs) { return lhs *= rhs; } int main() { Fraction f1(3, 8), f2(1, 2), f3(10, 2); std::cout << f1 << " * " << f2 << " = " << f1 * f2 << '\n' << f2 << " * " << f3 << " = " << f2 * f3 << '\n' << 2 << " * " << f1 << " = " << 2 * f1 << '\n'; }
Output:
3/8 * 1/2 = 3/16 1/2 * 5/1 = 5/2 2 * 3/8 = 3/4
Defect reports
The following behavior-changing defect reports were applied retroactively to previously published C++ standards.
| DR | Applied to | Behavior as published | Correct behavior |
|---|---|---|---|
| CWG 1458 | C++11 | taking address of incomplete type that overloads address-of was undefined behavior | the behavior is only unspecified |
See Also
| Common operators | ||||||
|---|---|---|---|---|---|---|
| assignment | increment decrement |
arithmetic | logical | comparison | member access |
other |
|
a = b |
++a |
+a |
!a |
a == b |
a[b] |
a(...) |
| Special operators | ||||||
|
static_cast converts one type to another related type | ||||||
References
- ↑ Operator Overloading on StackOverflow C++ FAQ