1.0.0[]Primitive Type fn

Function pointers, like fn(usize) -> bool.

See also the traits Fn, FnMut, and FnOnce.

Plain function pointers are obtained by casting either plain functions, or closures that don't capture an environment:

fn add_one(x: usize) -> usize {
    x + 1
}

let ptr: fn(usize) -> usize = add_one;
assert_eq!(ptr(5), 6);

let clos: fn(usize) -> usize = |x| x + 5;
assert_eq!(clos(5), 10);Run

In addition to varying based on their signature, function pointers come in two flavors: safe and unsafe. Plain fn() function pointers can only point to safe functions, while unsafe fn() function pointers can point to safe or unsafe functions.

fn add_one(x: usize) -> usize {
    x + 1
}

unsafe fn add_one_unsafely(x: usize) -> usize {
    x + 1
}

let safe_ptr: fn(usize) -> usize = add_one;

//ERROR: mismatched types: expected normal fn, found unsafe fn
//let bad_ptr: fn(usize) -> usize = add_one_unsafely;

let unsafe_ptr: unsafe fn(usize) -> usize = add_one_unsafely;
let really_safe_ptr: unsafe fn(usize) -> usize = add_one;Run

On top of that, function pointers can vary based on what ABI they use. This is achieved by adding the extern keyword to the type name, followed by the ABI in question. For example, fn() is different from extern "C" fn(), which itself is different from extern "stdcall" fn(), and so on for the various ABIs that Rust supports. Non-extern functions have an ABI of "Rust", and extern functions without an explicit ABI have an ABI of "C". For more information, see the nomicon's section on foreign calling conventions.

Extern function declarations with the "C" or "cdecl" ABIs can also be variadic, allowing them to be called with a variable number of arguments. Normal rust functions, even those with an extern "ABI", cannot be variadic. For more information, see the nomicon's section on variadic functions.

These markers can be combined, so unsafe extern "stdcall" fn() is a valid type.

Like references in rust, function pointers are assumed to not be null, so if you want to pass a function pointer over FFI and be able to accommodate null pointers, make your type Option<fn()> with your required signature.

Function pointers implement the following traits:

Due to a temporary restriction in Rust's type system, these traits are only implemented on functions that take 12 arguments or less, with the "Rust" and "C" ABIs. In the future, this may change.

In addition, function pointers of any signature, ABI, or safety are Copy, and all safe function pointers implement Fn, FnMut, and FnOnce. This works because these traits are specially known to the compiler.

Trait Implementations

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret> Hash for extern "C" fn() -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for fn(A, B, C) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for fn(A, B, C, D, E) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret> Hash for fn() -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for unsafe extern "C" fn(A) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for unsafe fn(A) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for extern "C" fn(A, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for fn(A, B, C, D) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for fn(A) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for unsafe fn(A, B) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A> Hash for extern "C" fn(A) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret> Hash for unsafe extern "C" fn() -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret> Hash for unsafe fn() -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for extern "C" fn(A, B) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F> Hash for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H> Hash for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E> Hash for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for unsafe fn(A, B, C) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for extern "C" fn(A, B, C) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Hash for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B> Hash for fn(A, B) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G> Hash for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Hash for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C> Hash for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D> Hash for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Hash for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<Ret> PartialOrd<fn() -> Ret> for fn() -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<extern "C" fn(A, B, C) -> Ret> for extern "C" fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<extern "C" fn(A, B, C, D) -> Ret> for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<extern "C" fn(A) -> Ret> for extern "C" fn(A) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<extern "C" fn(A, B, C, D, E, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<extern "C" fn(A, B) -> Ret> for extern "C" fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<fn(A, B) -> Ret> for fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<unsafe fn(A, B, C, D, E) -> Ret> for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<unsafe extern "C" fn(A, B, C, D, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<extern "C" fn(A, B, VaList) -> Ret> for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<fn(A, B, C, D, E, F) -> Ret> for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<extern "C" fn(A, B, C, D, E, F, G) -> Ret> for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret> PartialOrd<unsafe fn() -> Ret> for unsafe fn() -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<fn(A) -> Ret> for fn(A) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<extern "C" fn(A, VaList) -> Ret> for extern "C" fn(A, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<extern "C" fn(A, B, C, D, VaList) -> Ret> for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<unsafe extern "C" fn(A, B, C, D) -> Ret> for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<unsafe fn(A) -> Ret> for unsafe fn(A) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret> PartialOrd<unsafe extern "C" fn() -> Ret> for unsafe extern "C" fn() -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<extern "C" fn(A, B, C, D, E, F) -> Ret> for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<unsafe fn(A, B, C, D, E, F, G) -> Ret> for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<fn(A, B, C, D, E, F, G, H, I) -> Ret> for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<fn(A, B, C, D, E, F, G, H) -> Ret> for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret> PartialOrd<extern "C" fn() -> Ret> for extern "C" fn() -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H> PartialOrd<unsafe fn(A, B, C, D, E, F, G, H) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<extern "C" fn(A, B, C, D, E, F, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<extern "C" fn(A, B, C, D, E) -> Ret> for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<unsafe extern "C" fn(A, B) -> Ret> for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<unsafe fn(A, B, C, D, E, F) -> Ret> for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<unsafe fn(A, B) -> Ret> for unsafe fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialOrd<fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<unsafe extern "C" fn(A) -> Ret> for unsafe extern "C" fn(A) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<fn(A, B, C) -> Ret> for fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B> PartialOrd<unsafe extern "C" fn(A, B, VaList) -> Ret> for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<unsafe fn(A, B, C, D) -> Ret> for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<unsafe fn(A, B, C) -> Ret> for unsafe fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G> PartialOrd<fn(A, B, C, D, E, F, G) -> Ret> for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D> PartialOrd<fn(A, B, C, D) -> Ret> for fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<fn(A, B, C, D, E) -> Ret> for fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A> PartialOrd<unsafe extern "C" fn(A, VaList) -> Ret> for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<extern "C" fn(A, B, C, VaList) -> Ret> for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<unsafe extern "C" fn(A, B, C, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C> PartialOrd<unsafe extern "C" fn(A, B, C) -> Ret> for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialOrd<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialOrd<unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E> PartialOrd<unsafe extern "C" fn(A, B, C, D, E) -> Ret> for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Ret, A, B, C, D, E, F> Eq for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A> Eq for unsafe extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Eq for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret> Eq for unsafe fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A> Eq for extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Eq for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A> Eq for extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret> Eq for fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Eq for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A> Eq for fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret> Eq for unsafe extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A> Eq for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Eq for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Eq for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Eq for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret> Eq for extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Eq for unsafe fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Eq for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Eq for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Eq for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B> Eq for unsafe fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A> Eq for unsafe fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Eq for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for unsafe fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret> Pointer for unsafe extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for unsafe fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret> Pointer for extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A> Pointer for unsafe fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Pointer for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A> Pointer for fn(A) -> Ret1.4.0[src]

impl<Ret> Pointer for unsafe fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Pointer for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C> Pointer for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A> Pointer for unsafe extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Pointer for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A> Pointer for extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret> Pointer for fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Pointer for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A> Pointer for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Pointer for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Pointer for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A> Pointer for extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Pointer for fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A> Debug for unsafe fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A> Debug for fn(A) -> Ret1.4.0[src]

impl<Ret, A> Debug for extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret> Debug for unsafe extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for unsafe fn(A, B, C) -> Ret1.4.0[src]

impl<Ret, A> Debug for extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for extern "C" fn(A, B, C) -> Ret1.4.0[src]

impl<Ret> Debug for fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

impl<Ret, A> Debug for unsafe extern "C" fn(A) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

impl<Ret, A> Debug for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

impl<Ret> Debug for unsafe fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F> Debug for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Debug for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

impl<Ret, A, B, C> Debug for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H> Debug for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

impl<Ret, A, B, C, D> Debug for fn(A, B, C, D) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for unsafe fn(A, B) -> Ret1.4.0[src]

impl<Ret> Debug for extern "C" fn() -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

impl<Ret, A, B> Debug for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J> Debug for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G> Debug for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E> Debug for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for extern "C" fn(A) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for unsafe fn(A, B) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for fn(A, B, C, D, E) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for fn(A, B) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret> Ord for unsafe fn() -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret> Ord for extern "C" fn() -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for fn(A, B, C) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for fn(A, B, C, D) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for extern "C" fn(A, B) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret> Ord for unsafe extern "C" fn() -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for unsafe extern "C" fn(A) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for extern "C" fn(A, B, C) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for unsafe fn(A, B, C) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J> Ord for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H> Ord for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for fn(A) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> Ord for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D> Ord for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for unsafe fn(A) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret> Ord for fn() -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E> Ord for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> Ord for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G, H, I> Ord for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C> Ord for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A> Ord for extern "C" fn(A, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F, G> Ord for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B> Ord for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<Ret, A, B, C, D, E, F> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<extern "C" fn(A) -> Ret> for extern "C" fn(A) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<extern "C" fn(A, B) -> Ret> for extern "C" fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<extern "C" fn(A, B, VaList) -> Ret> for extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<extern "C" fn(A, B, C, D) -> Ret> for extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<extern "C" fn(A, B, C, D, E, F, G) -> Ret> for extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<fn(A, B, C) -> Ret> for fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret> PartialEq<fn() -> Ret> for fn() -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<unsafe fn(A, B, C, D, E, F, G, H) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<unsafe fn(A, B, C, D, E) -> Ret> for unsafe fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F> PartialEq<extern "C" fn(A, B, C, D, E, F, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<fn(A, B, C, D) -> Ret> for fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<unsafe fn(A, B, C) -> Ret> for unsafe fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<extern "C" fn(A, B, C, D, E) -> Ret> for extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<extern "C" fn(A, VaList) -> Ret> for extern "C" fn(A, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<unsafe extern "C" fn(A, B) -> Ret> for unsafe extern "C" fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<extern "C" fn(A, B, C, D, E, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<unsafe extern "C" fn(A, B, C) -> Ret> for unsafe extern "C" fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<fn(A, B, C, D, E, F, G, H) -> Ret> for fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F> PartialEq<unsafe fn(A, B, C, D, E, F) -> Ret> for unsafe fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<extern "C" fn(A, B, C, VaList) -> Ret> for extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F> PartialEq<fn(A, B, C, D, E, F) -> Ret> for fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret> PartialEq<extern "C" fn() -> Ret> for extern "C" fn() -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<unsafe fn(A, B) -> Ret> for unsafe fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<unsafe fn(A, B, C, D) -> Ret> for unsafe fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<unsafe extern "C" fn(A, B, C, D, E) -> Ret> for unsafe extern "C" fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<unsafe extern "C" fn(A, B, C, D) -> Ret> for unsafe extern "C" fn(A, B, C, D) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret> PartialEq<unsafe fn() -> Ret> for unsafe fn() -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<fn(A, B) -> Ret> for fn(A, B) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<unsafe extern "C" fn(A, VaList) -> Ret> for unsafe extern "C" fn(A, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K, L> PartialEq<unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret> for unsafe fn(A, B, C, D, E, F, G, H, I, J, K, L) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F> PartialEq<extern "C" fn(A, B, C, D, E, F) -> Ret> for extern "C" fn(A, B, C, D, E, F) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I> PartialEq<fn(A, B, C, D, E, F, G, H, I) -> Ret> for fn(A, B, C, D, E, F, G, H, I) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<extern "C" fn(A, B, C, D, VaList) -> Ret> for extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<unsafe fn(A) -> Ret> for unsafe fn(A) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<fn(A) -> Ret> for fn(A) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<fn(A, B, C, D, E, F, G) -> Ret> for fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret> PartialEq<unsafe extern "C" fn() -> Ret> for unsafe extern "C" fn() -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<unsafe extern "C" fn(A, B, C, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B> PartialEq<unsafe extern "C" fn(A, B, VaList) -> Ret> for unsafe extern "C" fn(A, B, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D> PartialEq<unsafe extern "C" fn(A, B, C, D, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret> for unsafe extern "C" fn(A, B, C, D, E, F, G, H, I, J) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A> PartialEq<unsafe extern "C" fn(A) -> Ret> for unsafe extern "C" fn(A) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C> PartialEq<extern "C" fn(A, B, C) -> Ret> for extern "C" fn(A, B, C) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret> for extern "C" fn(A, B, C, D, E, F, G, H, I, J, K, VaList) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G> PartialEq<unsafe fn(A, B, C, D, E, F, G) -> Ret> for unsafe fn(A, B, C, D, E, F, G) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E, F, G, H, I, J, K> PartialEq<fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret> for fn(A, B, C, D, E, F, G, H, I, J, K) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.

impl<Ret, A, B, C, D, E> PartialEq<fn(A, B, C, D, E) -> Ret> for fn(A, B, C, D, E) -> Ret1.4.0[src]

#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]

This method tests for !=.