statistics
 Mathematical statistics functions¶
3.4 新版功能.
Source code: Lib/statistics.py
This module provides functions for calculating mathematical statistics of
numeric (Real
valued) data.
注解
Unless explicitly noted otherwise, these functions support int
,
float
, decimal.Decimal
and fractions.Fraction
.
Behaviour with other types (whether in the numeric tower or not) is
currently unsupported. Mixed types are also undefined and
implementationdependent. If your input data consists of mixed types,
you may be able to use map()
to ensure a consistent result, e.g.
map(float, input_data)
.
Averages and measures of central location¶
These functions calculate an average or typical value from a population or sample.
mean() 
Arithmetic mean ("average") of data. 
harmonic_mean() 
Harmonic mean of data. 
median() 
Median (middle value) of data. 
median_low() 
Low median of data. 
median_high() 
High median of data. 
median_grouped() 
Median, or 50th percentile, of grouped data. 
mode() 
Mode (most common value) of discrete data. 
Measures of spread¶
These functions calculate a measure of how much the population or sample tends to deviate from the typical or average values.
pstdev() 
Population standard deviation of data. 
pvariance() 
Population variance of data. 
stdev() 
Sample standard deviation of data. 
variance() 
Sample variance of data. 
Function details¶
Note: The functions do not require the data given to them to be sorted. However, for reading convenience, most of the examples show sorted sequences.

statistics.
mean
(data)¶ Return the sample arithmetic mean of data which can be a sequence or iterator.
The arithmetic mean is the sum of the data divided by the number of data points. It is commonly called "the average", although it is only one of many different mathematical averages. It is a measure of the central location of the data.
If data is empty,
StatisticsError
will be raised.Some examples of use:
>>> mean([1, 2, 3, 4, 4]) 2.8 >>> mean([1.0, 2.5, 3.25, 5.75]) 2.625 >>> from fractions import Fraction as F >>> mean([F(3, 7), F(1, 21), F(5, 3), F(1, 3)]) Fraction(13, 21) >>> from decimal import Decimal as D >>> mean([D("0.5"), D("0.75"), D("0.625"), D("0.375")]) Decimal('0.5625')
注解
The mean is strongly affected by outliers and is not a robust estimator for central location: the mean is not necessarily a typical example of the data points. For more robust, although less efficient, measures of central location, see
median()
andmode()
. (In this case, "efficient" refers to statistical efficiency rather than computational efficiency.)The sample mean gives an unbiased estimate of the true population mean, which means that, taken on average over all the possible samples,
mean(sample)
converges on the true mean of the entire population. If data represents the entire population rather than a sample, thenmean(data)
is equivalent to calculating the true population mean μ.

statistics.
harmonic_mean
(data)¶ Return the harmonic mean of data, a sequence or iterator of realvalued numbers.
The harmonic mean, sometimes called the subcontrary mean, is the reciprocal of the arithmetic
mean()
of the reciprocals of the data. For example, the harmonic mean of three values a, b and c will be equivalent to3/(1/a + 1/b + 1/c)
.The harmonic mean is a type of average, a measure of the central location of the data. It is often appropriate when averaging quantities which are rates or ratios, for example speeds. For example:
Suppose an investor purchases an equal value of shares in each of three companies, with P/E (price/earning) ratios of 2.5, 3 and 10. What is the average P/E ratio for the investor's portfolio?
>>> harmonic_mean([2.5, 3, 10]) # For an equal investment portfolio. 3.6
Using the arithmetic mean would give an average of about 5.167, which is too high.
StatisticsError
is raised if data is empty, or any element is less than zero.3.6 新版功能.

statistics.
median
(data)¶ Return the median (middle value) of numeric data, using the common "mean of middle two" method. If data is empty,
StatisticsError
is raised. data can be a sequence or iterator.The median is a robust measure of central location, and is less affected by the presence of outliers in your data. When the number of data points is odd, the middle data point is returned:
>>> median([1, 3, 5]) 3
When the number of data points is even, the median is interpolated by taking the average of the two middle values:
>>> median([1, 3, 5, 7]) 4.0
This is suited for when your data is discrete, and you don't mind that the median may not be an actual data point.
If your data is ordinal (supports order operations) but not numeric (doesn't support addition), you should use
median_low()
ormedian_high()
instead.

statistics.
median_low
(data)¶ Return the low median of numeric data. If data is empty,
StatisticsError
is raised. data can be a sequence or iterator.The low median is always a member of the data set. When the number of data points is odd, the middle value is returned. When it is even, the smaller of the two middle values is returned.
>>> median_low([1, 3, 5]) 3 >>> median_low([1, 3, 5, 7]) 3
Use the low median when your data are discrete and you prefer the median to be an actual data point rather than interpolated.

statistics.
median_high
(data)¶ Return the high median of data. If data is empty,
StatisticsError
is raised. data can be a sequence or iterator.The high median is always a member of the data set. When the number of data points is odd, the middle value is returned. When it is even, the larger of the two middle values is returned.
>>> median_high([1, 3, 5]) 3 >>> median_high([1, 3, 5, 7]) 5
Use the high median when your data are discrete and you prefer the median to be an actual data point rather than interpolated.

statistics.
median_grouped
(data, interval=1)¶ Return the median of grouped continuous data, calculated as the 50th percentile, using interpolation. If data is empty,
StatisticsError
is raised. data can be a sequence or iterator.>>> median_grouped([52, 52, 53, 54]) 52.5
In the following example, the data are rounded, so that each value represents the midpoint of data classes, e.g. 1 is the midpoint of the class 0.51.5, 2 is the midpoint of 1.52.5, 3 is the midpoint of 2.53.5, etc. With the data given, the middle value falls somewhere in the class 3.54.5, and interpolation is used to estimate it:
>>> median_grouped([1, 2, 2, 3, 4, 4, 4, 4, 4, 5]) 3.7
Optional argument interval represents the class interval, and defaults to 1. Changing the class interval naturally will change the interpolation:
>>> median_grouped([1, 3, 3, 5, 7], interval=1) 3.25 >>> median_grouped([1, 3, 3, 5, 7], interval=2) 3.5
This function does not check whether the data points are at least interval apart.
CPython implementation detail: Under some circumstances,
median_grouped()
may coerce data points to floats. This behaviour is likely to change in the future.参见
 "Statistics for the Behavioral Sciences", Frederick J Gravetter and Larry B Wallnau (8th Edition).
 The SSMEDIAN function in the Gnome Gnumeric spreadsheet, including this discussion.

statistics.
mode
(data)¶ Return the most common data point from discrete or nominal data. The mode (when it exists) is the most typical value, and is a robust measure of central location.
If data is empty, or if there is not exactly one most common value,
StatisticsError
is raised.mode
assumes discrete data, and returns a single value. This is the standard treatment of the mode as commonly taught in schools:>>> mode([1, 1, 2, 3, 3, 3, 3, 4]) 3
The mode is unique in that it is the only statistic which also applies to nominal (nonnumeric) data:
>>> mode(["red", "blue", "blue", "red", "green", "red", "red"]) 'red'

statistics.
pstdev
(data, mu=None)¶ Return the population standard deviation (the square root of the population variance). See
pvariance()
for arguments and other details.>>> pstdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75]) 0.986893273527251

statistics.
pvariance
(data, mu=None)¶ Return the population variance of data, a nonempty iterable of realvalued numbers. Variance, or second moment about the mean, is a measure of the variability (spread or dispersion) of data. A large variance indicates that the data is spread out; a small variance indicates it is clustered closely around the mean.
If the optional second argument mu is given, it should be the mean of data. If it is missing or
None
(the default), the mean is automatically calculated.Use this function to calculate the variance from the entire population. To estimate the variance from a sample, the
variance()
function is usually a better choice.Raises
StatisticsError
if data is empty.示例：
>>> data = [0.0, 0.25, 0.25, 1.25, 1.5, 1.75, 2.75, 3.25] >>> pvariance(data) 1.25
If you have already calculated the mean of your data, you can pass it as the optional second argument mu to avoid recalculation:
>>> mu = mean(data) >>> pvariance(data, mu) 1.25
This function does not attempt to verify that you have passed the actual mean as mu. Using arbitrary values for mu may lead to invalid or impossible results.
Decimals and Fractions are supported:
>>> from decimal import Decimal as D >>> pvariance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")]) Decimal('24.815') >>> from fractions import Fraction as F >>> pvariance([F(1, 4), F(5, 4), F(1, 2)]) Fraction(13, 72)
注解
When called with the entire population, this gives the population variance σ². When called on a sample instead, this is the biased sample variance s², also known as variance with N degrees of freedom.
If you somehow know the true population mean μ, you may use this function to calculate the variance of a sample, giving the known population mean as the second argument. Provided the data points are representative (e.g. independent and identically distributed), the result will be an unbiased estimate of the population variance.

statistics.
stdev
(data, xbar=None)¶ Return the sample standard deviation (the square root of the sample variance). See
variance()
for arguments and other details.>>> stdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75]) 1.0810874155219827

statistics.
variance
(data, xbar=None)¶ Return the sample variance of data, an iterable of at least two realvalued numbers. Variance, or second moment about the mean, is a measure of the variability (spread or dispersion) of data. A large variance indicates that the data is spread out; a small variance indicates it is clustered closely around the mean.
If the optional second argument xbar is given, it should be the mean of data. If it is missing or
None
(the default), the mean is automatically calculated.Use this function when your data is a sample from a population. To calculate the variance from the entire population, see
pvariance()
.Raises
StatisticsError
if data has fewer than two values.示例：
>>> data = [2.75, 1.75, 1.25, 0.25, 0.5, 1.25, 3.5] >>> variance(data) 1.3720238095238095
If you have already calculated the mean of your data, you can pass it as the optional second argument xbar to avoid recalculation:
>>> m = mean(data) >>> variance(data, m) 1.3720238095238095
This function does not attempt to verify that you have passed the actual mean as xbar. Using arbitrary values for xbar can lead to invalid or impossible results.
Decimal and Fraction values are supported:
>>> from decimal import Decimal as D >>> variance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")]) Decimal('31.01875') >>> from fractions import Fraction as F >>> variance([F(1, 6), F(1, 2), F(5, 3)]) Fraction(67, 108)
注解
This is the sample variance s² with Bessel's correction, also known as variance with N1 degrees of freedom. Provided that the data points are representative (e.g. independent and identically distributed), the result should be an unbiased estimate of the true population variance.
If you somehow know the actual population mean μ you should pass it to the
pvariance()
function as the mu parameter to get the variance of a sample.
异常¶
A single exception is defined:

exception
statistics.
StatisticsError
¶ Subclass of
ValueError
for statisticsrelated exceptions.