使用 DTrace 和 SystemTap 检测CPython¶

作者:	David Malcolm
作者:	Łukasz Langa

DTrace and SystemTap are monitoring tools, each providing a way to inspect what the processes on a computer system are doing. They both use domain-specific languages allowing a user to write scripts which:

filter which processes are to be observed

gather data from the processes of interest

generate reports on the data

As of Python 3.6, CPython can be built with embedded “markers”, also known as “probes”, that can be observed by a DTrace or SystemTap script, making it easier to monitor what the CPython processes on a system are doing.

CPython implementation detail: DTrace markers are implementation details of the CPython interpreter. No guarantees are made about probe compatibility between versions of CPython. DTrace scripts can stop working or work incorrectly without warning when changing CPython versions.

Enabling the static markers¶

macOS comes with built-in support for DTrace. On Linux, in order to build CPython with the embedded markers for SystemTap, the SystemTap development tools must be installed.

On a Linux machine, this can be done via:

$ yum install systemtap-sdt-devel

or:

$ sudo apt-get install systemtap-sdt-dev

CPython must then be configured --with-dtrace:

checking for --with-dtrace... yes

On macOS, you can list available DTrace probes by running a Python process in the background and listing all probes made available by the Python provider:

$ python3.6 -q &
$ sudo dtrace -l -P python$!  # or: dtrace -l -m python3.6

   ID   PROVIDER            MODULE                          FUNCTION NAME
python18035        python3.6          _PyEval_EvalFrameDefault function-entry
python18035        python3.6             dtrace_function_entry function-entry
python18035        python3.6          _PyEval_EvalFrameDefault function-return
python18035        python3.6            dtrace_function_return function-return
python18035        python3.6                           collect gc-done
python18035        python3.6                           collect gc-start
python18035        python3.6          _PyEval_EvalFrameDefault line
python18035        python3.6                 maybe_dtrace_line line

On Linux, you can verify if the SystemTap static markers are present in the built binary by seeing if it contains a “.note.stapsdt” section.

$ readelf -S ./python | grep .note.stapsdt
[30] .note.stapsdt        NOTE         0000000000000000 00308d78

If you’ve built Python as a shared library (with –enable-shared), you need to look instead within the shared library. For example:

$ readelf -S libpython3.3dm.so.1.0 | grep .note.stapsdt
[29] .note.stapsdt        NOTE         0000000000000000 00365b68

Sufficiently modern readelf can print the metadata:

$ readelf -n ./python

Displaying notes found at file offset 0x00000254 with length 0x00000020:
    Owner                 Data size          Description
    GNU                  0x00000010          NT_GNU_ABI_TAG (ABI version tag)
        OS: Linux, ABI: 2.6.32

Displaying notes found at file offset 0x00000274 with length 0x00000024:
    Owner                 Data size          Description
    GNU                  0x00000014          NT_GNU_BUILD_ID (unique build ID bitstring)
        Build ID: df924a2b08a7e89f6e11251d4602022977af2670

Displaying notes found at file offset 0x002d6c30 with length 0x00000144:
    Owner                 Data size          Description
    stapsdt              0x00000031          NT_STAPSDT (SystemTap probe descriptors)
        Provider: python
        Name: gc__start
        Location: 0x00000000004371c3, Base: 0x0000000000630ce2, Semaphore: 0x00000000008d6bf6
        Arguments: -4@%ebx
    stapsdt              0x00000030          NT_STAPSDT (SystemTap probe descriptors)
        Provider: python
        Name: gc__done
        Location: 0x00000000004374e1, Base: 0x0000000000630ce2, Semaphore: 0x00000000008d6bf8
        Arguments: -8@%rax
    stapsdt              0x00000045          NT_STAPSDT (SystemTap probe descriptors)
        Provider: python
        Name: function__entry
        Location: 0x000000000053db6c, Base: 0x0000000000630ce2, Semaphore: 0x00000000008d6be8
        Arguments: 8@%rbp 8@%r12 -4@%eax
    stapsdt              0x00000046          NT_STAPSDT (SystemTap probe descriptors)
        Provider: python
        Name: function__return
        Location: 0x000000000053dba8, Base: 0x0000000000630ce2, Semaphore: 0x00000000008d6bea
        Arguments: 8@%rbp 8@%r12 -4@%eax

The above metadata contains information for SystemTap describing how it can patch strategically-placed machine code instructions to enable the tracing hooks used by a SystemTap script.

Static DTrace probes¶

The following example DTrace script can be used to show the call/return hierarchy of a Python script, only tracing within the invocation of a function called “start”. In other words, import-time function invocations are not going to be listed:

self int indent;

python$target:::function-entry
/copyinstr(arg1) == "start"/
{
        self->trace = 1;
}

python$target:::function-entry
/self->trace/
{
        printf("%d\t%*s:", timestamp, 15, probename);
        printf("%*s", self->indent, "");
        printf("%s:%s:%d\n", basename(copyinstr(arg0)), copyinstr(arg1), arg2);
        self->indent++;
}

python$target:::function-return
/self->trace/
{
        self->indent--;
        printf("%d\t%*s:", timestamp, 15, probename);
        printf("%*s", self->indent, "");
        printf("%s:%s:%d\n", basename(copyinstr(arg0)), copyinstr(arg1), arg2);
}

python$target:::function-return
/copyinstr(arg1) == "start"/
{
        self->trace = 0;
}

It can be invoked like this:

$ sudo dtrace -q -s call_stack.d -c "python3.6 script.py"

输出结果会像这样:

156641360502280  function-entry:call_stack.py:start:23
156641360518804  function-entry: call_stack.py:function_1:1
156641360532797  function-entry:  call_stack.py:function_3:9
156641360546807 function-return:  call_stack.py:function_3:10
156641360563367 function-return: call_stack.py:function_1:2
156641360578365  function-entry: call_stack.py:function_2:5
156641360591757  function-entry:  call_stack.py:function_1:1
156641360605556  function-entry:   call_stack.py:function_3:9
156641360617482 function-return:   call_stack.py:function_3:10
156641360629814 function-return:  call_stack.py:function_1:2
156641360642285 function-return: call_stack.py:function_2:6
156641360656770  function-entry: call_stack.py:function_3:9
156641360669707 function-return: call_stack.py:function_3:10
156641360687853  function-entry: call_stack.py:function_4:13
156641360700719 function-return: call_stack.py:function_4:14
156641360719640  function-entry: call_stack.py:function_5:18
156641360732567 function-return: call_stack.py:function_5:21
156641360747370 function-return:call_stack.py:start:28

Static SystemTap markers¶

The low-level way to use the SystemTap integration is to use the static markers directly. This requires you to explicitly state the binary file containing them.

For example, this SystemTap script can be used to show the call/return hierarchy of a Python script:

probe process("python").mark("function__entry") {
     filename = user_string($arg1);
     funcname = user_string($arg2);
     lineno = $arg3;

     printf("%s => %s in %s:%d\\n",
            thread_indent(1), funcname, filename, lineno);
}

probe process("python").mark("function__return") {
    filename = user_string($arg1);
    funcname = user_string($arg2);
    lineno = $arg3;

    printf("%s <= %s in %s:%d\\n",
           thread_indent(-1), funcname, filename, lineno);
}

It can be invoked like this:

$ stap \
  show-call-hierarchy.stp \
  -c "./python test.py"

输出结果会像这样:

python(8274):        => __contains__ in Lib/_abcoll.py:362
python(8274):         => __getitem__ in Lib/os.py:425
python(8274):          => encode in Lib/os.py:490
python(8274):          <= encode in Lib/os.py:493
python(8274):         <= __getitem__ in Lib/os.py:426
python(8274):        <= __contains__ in Lib/_abcoll.py:366

where the columns are:

time in microseconds since start of script

name of executable

PID of process

and the remainder indicates the call/return hierarchy as the script executes.

For a –enable-shared build of CPython, the markers are contained within the libpython shared library, and the probe’s dotted path needs to reflect this. For example, this line from the above example:

probe process("python").mark("function__entry") {

should instead read:

probe process("python").library("libpython3.6dm.so.1.0").mark("function__entry") {

(assuming a debug build of CPython 3.6)

Available static markers¶

function__entry(str filename, str funcname, int lineno)¶

This marker indicates that execution of a Python function has begun. It is only triggered for pure-Python (bytecode) functions.

The filename, function name, and line number are provided back to the tracing script as positional arguments, which must be accessed using $arg1, $arg2, $arg3:

$arg1 : (const char *) filename, accessible using user_string($arg1)

$arg2 : (const char *) function name, accessible using user_string($arg2)

$arg3 : int line number

function__return(str filename, str funcname, int lineno)¶

This marker is the converse of function__entry(), and indicates that execution of a Python function has ended (either via return, or via an exception). It is only triggered for pure-Python (bytecode) functions.

The arguments are the same as for function__entry()

line(str filename, str funcname, int lineno)¶

This marker indicates a Python line is about to be executed. It is the equivalent of line-by-line tracing with a Python profiler. It is not triggered within C functions.

The arguments are the same as for function__entry().

gc__start(int generation)¶: Fires when the Python interpreter starts a garbage collection cycle. arg0 is the generation to scan, like gc.collect().

gc__done(long collected)¶: Fires when the Python interpreter finishes a garbage collection cycle. arg0 is the number of collected objects.

SystemTap Tapsets¶

The higher-level way to use the SystemTap integration is to use a “tapset”: SystemTap’s equivalent of a library, which hides some of the lower-level details of the static markers.

Here is a tapset file, based on a non-shared build of CPython:

/*
   Provide a higher-level wrapping around the function__entry and
   function__return markers:
 \*/
probe python.function.entry = process("python").mark("function__entry")
{
    filename = user_string($arg1);
    funcname = user_string($arg2);
    lineno = $arg3;
    frameptr = $arg4
}
probe python.function.return = process("python").mark("function__return")
{
    filename = user_string($arg1);
    funcname = user_string($arg2);
    lineno = $arg3;
    frameptr = $arg4
}

If this file is installed in SystemTap’s tapset directory (e.g. /usr/share/systemtap/tapset), then these additional probepoints become available:

python.function.entry(str filename, str funcname, int lineno, frameptr)¶: This probe point indicates that execution of a Python function has begun. It is only triggered for pure-python (bytecode) functions.

python.function.return(str filename, str funcname, int lineno, frameptr)¶: This probe point is the converse of python.function.return(), and indicates that execution of a Python function has ended (either via return, or via an exception). It is only triggered for pure-python (bytecode) functions.

示例¶

This SystemTap script uses the tapset above to more cleanly implement the example given above of tracing the Python function-call hierarchy, without needing to directly name the static markers:

probe python.function.entry
{
  printf("%s => %s in %s:%d\n",
         thread_indent(1), funcname, filename, lineno);
}

probe python.function.return
{
  printf("%s <= %s in %s:%d\n",
         thread_indent(-1), funcname, filename, lineno);
}

The following script uses the tapset above to provide a top-like view of all running CPython code, showing the top 20 most frequently-entered bytecode frames, each second, across the whole system:

global fn_calls;

probe python.function.entry
{
    fn_calls[pid(), filename, funcname, lineno] += 1;
}

probe timer.ms(1000) {
    printf("\033[2J\033[1;1H") /* clear screen \*/
    printf("%6s %80s %6s %30s %6s\n",
           "PID", "FILENAME", "LINE", "FUNCTION", "CALLS")
    foreach ([pid, filename, funcname, lineno] in fn_calls- limit 20) {
        printf("%6d %80s %6d %30s %6d\n",
            pid, filename, lineno, funcname,
            fn_calls[pid, filename, funcname, lineno]);
    }
    delete fn_calls;
}

使用 DTrace 和 SystemTap 检测CPython¶

Enabling the static markers¶

Static DTrace probes¶

Static SystemTap markers¶

Available static markers¶

SystemTap Tapsets¶

示例¶

Table of Contents

上一个主题

下一个主题

本页