6. 简单语句¶

Simple statements are comprised within a single logical line. Several simple statements may occur on a single line separated by semicolons. The syntax for simple statements is:

simple_stmt ::=  expression_stmt
                 | assert_stmt
                 | assignment_stmt
                 | augmented_assignment_stmt
                 | pass_stmt
                 | del_stmt
                 | print_stmt
                 | return_stmt
                 | yield_stmt
                 | raise_stmt
                 | break_stmt
                 | continue_stmt
                 | import_stmt
                 | future_stmt
                 | global_stmt
                 | exec_stmt

6.1. 表达式语句¶

表达式语句用于计算和写入值（大多是在交互模式下），或者（通常情况）调用一个过程 (过程就是不返回有意义结果的函数；在 Python 中，过程的返回值为 None)。表达式语句的其他使用方式也是允许且有特定用处的。表达式语句的句法为:

expression_stmt ::=  expression_list

表达式语句会对指定的表达式列表（也可能为单一表达式）进行求值。

In interactive mode, if the value is not None, it is converted to a string using the built-in repr() function and the resulting string is written to standard output (see section The print statement) on a line by itself. (Expression statements yielding None are not written, so that procedure calls do not cause any output.)

6.2. 赋值语句¶

赋值语句用于将名称（重）绑定到特定值，以及修改属性或可变对象的成员项:

assignment_stmt ::=  (target_list "=")+ (expression_list | yield_expression)
target_list     ::=  target ("," target)* [","]
target          ::=  identifier
                     | "(" target_list ")"
                     | "[" [target_list] "]"
                     | attributeref
                     | subscription
                     | slicing

(See section 原型 for the syntax definitions for the last three symbols.)

赋值语句会对指定的表达式列表进行求值（注意这可能为单一表达式或是由逗号分隔的列表，后者将产生一个元组）并将单一结果对象从左至右逐个赋值给目标列表。

赋值是根据目标（列表）的格式递归地定义的。当目标为一个可变对象（属性引用、抽取或切片）的组成部分时，该可变对象必须最终执行赋值并决定其有效性，如果赋值操作不可接受也可能引发异常。各种类型可用的规则和引发的异常通过对象类型的定义给出（参见标准类型层级结构一节）。

Assignment of an object to a target list is recursively defined as follows.

If the target list is a single target: The object is assigned to that target.
If the target list is a comma-separated list of targets: The object must be an iterable with the same number of items as there are targets in the target list, and the items are assigned, from left to right, to the corresponding targets.

对象赋值给单个目标的操作按以下方式递归地定义。

如果目标为标识符（名称）:
- If the name does not occur in a global statement in the current code block: the name is bound to the object in the current local namespace.
- Otherwise: the name is bound to the object in the current global namespace.
如果该名称已经被绑定则将被重新绑定。这可能导致之前被绑定到该名称的对象的引用计数变为零，造成该对象进入释放过程并调用其析构器（如果存在）。
If the target is a target list enclosed in parentheses or in square brackets: The object must be an iterable with the same number of items as there are targets in the target list, and its items are assigned, from left to right, to the corresponding targets.
如果该对象为属性引用：引用中的原型表达式会被求值。它应该产生一个具有可赋值属性的对象；否则将引发 TypeError。该对象会被要求将可赋值对象赋值给指定的属性；如果它无法执行赋值，则会引发异常 (通常应为 AttributeError 但并不强制要求)。

注意：如果该对象为类实例并且属性引用在赋值运算符的两侧都出现，则右侧表达式 a.x 可以访问实例属性或（如果实例属性不存在）类属性。左侧目标 a.x 将总是设定为实例属性，并在必要时创建该实例属性。因此，a.x 的两次出现不一定指向相同的属性：如果右侧表达式指向一个类属性，则左侧表达式会创建一个新的实例属性作为赋值的目标:
```
class Cls:
    x = 3             # class variable
inst = Cls()
inst.x = inst.x + 1   # writes inst.x as 4 leaving Cls.x as 3
```
此描述不一定作用于描述器属性，例如通过 property() 创建的特征属性。
If the target is a subscription: The primary expression in the reference is evaluated. It should yield either a mutable sequence object (such as a list) or a mapping object (such as a dictionary). Next, the subscript expression is evaluated.

If the primary is a mutable sequence object (such as a list), the subscript must yield a plain integer. If it is negative, the sequence’s length is added to it. The resulting value must be a nonnegative integer less than the sequence’s length, and the sequence is asked to assign the assigned object to its item with that index. If the index is out of range, IndexError is raised (assignment to a subscripted sequence cannot add new items to a list).

如果原型为一个映射对象（例如字典），抽取必须具有与该映射的键类型相兼容的类型，然后映射中会创建一个将抽取映射到被赋值对象的键/值对。这可以是替换一个现有键/值对并保持相同键值，也可以是插入一个新键/值对（如果具有相同值的键不存在）。
If the target is a slicing: The primary expression in the reference is evaluated. It should yield a mutable sequence object (such as a list). The assigned object should be a sequence object of the same type. Next, the lower and upper bound expressions are evaluated, insofar they are present; defaults are zero and the sequence’s length. The bounds should evaluate to (small) integers. If either bound is negative, the sequence’s length is added to it. The resulting bounds are clipped to lie between zero and the sequence’s length, inclusive. Finally, the sequence object is asked to replace the slice with the items of the assigned sequence. The length of the slice may be different from the length of the assigned sequence, thus changing the length of the target sequence, if the object allows it.

在当前实现中，目标的句法被当作与表达式的句法相同，无效的句法会在代码生成阶段被拒绝，导致不太详细的错误信息。

WARNING: Although the definition of assignment implies that overlaps between the left-hand side and the right-hand side are ‘safe’ (for example a, b = b, a swaps two variables), overlaps within the collection of assigned-to variables are not safe! For instance, the following program prints [0, 2]:

x = [0, 1]
i = 0
i, x[i] = 1, 2
print x

6.2.1. 增强赋值语句¶

增强赋值语句就是在单个语句中将二元运算和赋值语句合为一体:

augmented_assignment_stmt ::=  augtarget augop (expression_list | yield_expression)
augtarget                 ::=  identifier | attributeref | subscription | slicing
augop                     ::=  "+=" | "-=" | "*=" | "/=" | "//=" | "%=" | "**="
                               | ">>=" | "<<=" | "&=" | "^=" | "|="

(See section 原型 for the syntax definitions for the last three symbols.)

增强赋值语句将对目标和表达式列表求值（与普通赋值语句不同的是，前者不能为可迭代对象拆包），对两个操作数相应类型的赋值执行指定的二元运算，并将结果赋值给原始目标。目标仅会被求值一次。

增强赋值语句例如 x += 1 可以改写为 x = x + 1 获得类似但并非完全等价的效果。在增强赋值的版本中，x 仅会被求值一次。而且，在可能的情况下，实际的运算是原地执行的，也就是说并不是创建一个新对象并将其赋值给目标，而是直接修改原对象。

除了在单个语句中赋值给元组和多个目标的例外情况，增强赋值语句的赋值操作处理方式与普通赋值相同。类似地，除了可能存在原地操作行为的例外情况，增强赋值语句执行的二元运算也与普通二元运算相同。

对于属性引用类目标，针对常规赋值的关于类和实例属性的警告也同样适用。

6.3. The `assert` statement¶

assert 语句是在程序中插入调试性断言的简便方式:

assert_stmt ::=  "assert" expression ["," expression]

简单形式 assert expression 等价于

if __debug__:
    if not expression: raise AssertionError

扩展形式 assert expression1, expression2 等价于

if __debug__:
    if not expression1: raise AssertionError(expression2)

These equivalences assume that __debug__ and AssertionError refer to the built-in variables with those names. In the current implementation, the built-in variable __debug__ is True under normal circumstances, False when optimization is requested (command line option -O). The current code generator emits no code for an assert statement when optimization is requested at compile time. Note that it is unnecessary to include the source code for the expression that failed in the error message; it will be displayed as part of the stack trace.

赋值给 __debug__ 是非法的。该内置变量的值会在解释器启动时确定。

6.4. The `pass` statement¶

pass_stmt ::=  "pass"

pass 是一个空操作 — 当它被执行时，什么都不发生。它适合当语法上需要一条语句但并不需要执行任何代码时用来临时占位，例如:

def f(arg): pass    # a function that does nothing (yet)

class C: pass       # a class with no methods (yet)

6.5. The `del` statement¶

del_stmt ::=  "del" target_list

删除是递归定义的，与赋值的定义方式非常类似。此处不再详细说明，只给出一些提示。

目标列表的删除将从左至右递归地删除每一个目标。

Deletion of a name removes the binding of that name from the local or global namespace, depending on whether the name occurs in a global statement in the same code block. If the name is unbound, a NameError exception will be raised.

It is illegal to delete a name from the local namespace if it occurs as a free variable in a nested block.

属性引用、抽取和切片的删除会被传递给相应的原型对象；删除一个切片基本等价于赋值为一个右侧类型的空切片（但即便这一点也是由切片对象决定的）。

6.6. The `print` statement¶

print_stmt ::=  "print" ([expression ("," expression)* [","]]
                | ">>" expression [("," expression)+ [","]])

print evaluates each expression in turn and writes the resulting object to standard output (see below). If an object is not a string, it is first converted to a string using the rules for string conversions. The (resulting or original) string is then written. A space is written before each object is (converted and) written, unless the output system believes it is positioned at the beginning of a line. This is the case (1) when no characters have yet been written to standard output, (2) when the last character written to standard output is a whitespace character except ' ', or (3) when the last write operation on standard output was not a print statement. (In some cases it may be functional to write an empty string to standard output for this reason.)

注解

Objects which act like file objects but which are not the built-in file objects often do not properly emulate this aspect of the file object’s behavior, so it is best not to rely on this.

A '\n' character is written at the end, unless the print statement ends with a comma. This is the only action if the statement contains just the keyword print.

Standard output is defined as the file object named stdout in the built-in module sys. If no such object exists, or if it does not have a write() method, a RuntimeError exception is raised.

print also has an extended form, defined by the second portion of the syntax described above. This form is sometimes referred to as “print chevron.” In this form, the first expression after the >> must evaluate to a “file-like” object, specifically an object that has a write() method as described above. With this extended form, the subsequent expressions are printed to this file object. If the first expression evaluates to None, then sys.stdout is used as the file for output.

6.7. The `return` statement¶

return_stmt ::=  "return" [expression_list]

return 在语法上只会出现于函数定义所嵌套的代码，不会出现于类定义所嵌套的代码。

如果提供了表达式列表，它将被求值，否则以 None 替代。

return 会离开当前函数调用，并以表达式列表 (或 None) 作为返回值。

When return passes control out of a try statement with a finally clause, that finally clause is executed before really leaving the function.

In a generator function, the return statement is not allowed to include an expression_list. In that context, a bare return indicates that the generator is done and will cause StopIteration to be raised.

6.8. The `yield` statement¶

yield_stmt ::=  yield_expression

The yield statement is only used when defining a generator function, and is only used in the body of the generator function. Using a yield statement in a function definition is sufficient to cause that definition to create a generator function instead of a normal function.

When a generator function is called, it returns an iterator known as a generator iterator, or more commonly, a generator. The body of the generator function is executed by calling the generator’s next() method repeatedly until it raises an exception.

When a yield statement is executed, the state of the generator is frozen and the value of expression_list is returned to next()’s caller. By “frozen” we mean that all local state is retained, including the current bindings of local variables, the instruction pointer, and the internal evaluation stack: enough information is saved so that the next time next() is invoked, the function can proceed exactly as if the yield statement were just another external call.

As of Python version 2.5, the yield statement is now allowed in the try clause of a try … finally construct. If the generator is not resumed before it is finalized (by reaching a zero reference count or by being garbage collected), the generator-iterator’s close() method will be called, allowing any pending finally clauses to execute.

有关 yield 语义的完整细节请参看 yield 表达式一节。

注解

In Python 2.2, the yield statement was only allowed when the generators feature has been enabled. This __future__ import statement was used to enable the feature:

from __future__ import generators

参见

PEP 255 - Simple Generators: The proposal for adding generators and the yield statement to Python.
PEP 342 - Coroutines via Enhanced Generators: The proposal that, among other generator enhancements, proposed allowing yield to appear inside a try … finally block.

6.9. The `raise` statement¶

raise_stmt ::=  "raise" [expression ["," expression ["," expression]]]

If no expressions are present, raise re-raises the last exception that was active in the current scope. If no exception is active in the current scope, a TypeError exception is raised indicating that this is an error (if running under IDLE, a Queue.Empty exception is raised instead).

Otherwise, raise evaluates the expressions to get three objects, using None as the value of omitted expressions. The first two objects are used to determine the type and value of the exception.

If the first object is an instance, the type of the exception is the class of the instance, the instance itself is the value, and the second object must be None.

If the first object is a class, it becomes the type of the exception. The second object is used to determine the exception value: If it is an instance of the class, the instance becomes the exception value. If the second object is a tuple, it is used as the argument list for the class constructor; if it is None, an empty argument list is used, and any other object is treated as a single argument to the constructor. The instance so created by calling the constructor is used as the exception value.

If a third object is present and not None, it must be a traceback object (see section 标准类型层级结构), and it is substituted instead of the current location as the place where the exception occurred. If the third object is present and not a traceback object or None, a TypeError exception is raised. The three-expression form of raise is useful to re-raise an exception transparently in an except clause, but raise with no expressions should be preferred if the exception to be re-raised was the most recently active exception in the current scope.

有关异常的更多信息可在异常一节查看，有关处理异常的信息可在 The try statement 一节查看。

6.10. The `break` statement¶

break_stmt ::=  "break"

break 在语法上只会出现于 for 或 while 循环所嵌套的代码，但不会出现于该循环内部的函数或类定义所嵌套的代码。

It terminates the nearest enclosing loop, skipping the optional else clause if the loop has one.

如果一个 for 循环被 break 所终结，该循环的控制目标会保持其当前值。

When break passes control out of a try statement with a finally clause, that finally clause is executed before really leaving the loop.

6.11. The `continue` statement¶

continue_stmt ::=  "continue"

continue 在语法上只会出现于 for 或 while 循环所嵌套的代码，但不会出现于该循环内部的函数或类定义或者 finally 子句所嵌套的代码。它会继续执行最近的外层循环的下一个轮次。

When continue passes control out of a try statement with a finally clause, that finally clause is executed before really starting the next loop cycle.

6.12. The `import` statement¶

import_stmt     ::=  "import" module ["as" name] ( "," module ["as" name] )*
                     | "from" relative_module "import" identifier ["as" name]
                     ( "," identifier ["as" name] )*
                     | "from" relative_module "import" "(" identifier ["as" name]
                     ( "," identifier ["as" name] )* [","] ")"
                     | "from" module "import" "*"
module          ::=  (identifier ".")* identifier
relative_module ::=  "."* module | "."+
name            ::=  identifier

Import statements are executed in two steps: (1) find a module, and initialize it if necessary; (2) define a name or names in the local namespace (of the scope where the import statement occurs). The statement comes in two forms differing on whether it uses the from keyword. The first form (without from) repeats these steps for each identifier in the list. The form with from performs step (1) once, and then performs step (2) repeatedly.

To understand how step (1) occurs, one must first understand how Python handles hierarchical naming of modules. To help organize modules and provide a hierarchy in naming, Python has a concept of packages. A package can contain other packages and modules while modules cannot contain other modules or packages. From a file system perspective, packages are directories and modules are files.

Once the name of the module is known (unless otherwise specified, the term “module” will refer to both packages and modules), searching for the module or package can begin. The first place checked is sys.modules, the cache of all modules that have been imported previously. If the module is found there then it is used in step (2) of import.

If the module is not found in the cache, then sys.meta_path is searched (the specification for sys.meta_path can be found in PEP 302). The object is a list of finder objects which are queried in order as to whether they know how to load the module by calling their find_module() method with the name of the module. If the module happens to be contained within a package (as denoted by the existence of a dot in the name), then a second argument to find_module() is given as the value of the __path__ attribute from the parent package (everything up to the last dot in the name of the module being imported). If a finder can find the module it returns a loader (discussed later) or returns None.

If none of the finders on sys.meta_path are able to find the module then some implicitly defined finders are queried. Implementations of Python vary in what implicit meta path finders are defined. The one they all do define, though, is one that handles sys.path_hooks, sys.path_importer_cache, and sys.path.

The implicit finder searches for the requested module in the “paths” specified in one of two places (“paths” do not have to be file system paths). If the module being imported is supposed to be contained within a package then the second argument passed to find_module(), __path__ on the parent package, is used as the source of paths. If the module is not contained in a package then sys.path is used as the source of paths.

Once the source of paths is chosen it is iterated over to find a finder that can handle that path. The dict at sys.path_importer_cache caches finders for paths and is checked for a finder. If the path does not have a finder cached then sys.path_hooks is searched by calling each object in the list with a single argument of the path, returning a finder or raises ImportError. If a finder is returned then it is cached in sys.path_importer_cache and then used for that path entry. If no finder can be found but the path exists then a value of None is stored in sys.path_importer_cache to signify that an implicit, file-based finder that handles modules stored as individual files should be used for that path. If the path does not exist then a finder which always returns None is placed in the cache for the path.

If no finder can find the module then ImportError is raised. Otherwise some finder returned a loader whose load_module() method is called with the name of the module to load (see PEP 302 for the original definition of loaders). A loader has several responsibilities to perform on a module it loads. First, if the module already exists in sys.modules (a possibility if the loader is called outside of the import machinery) then it is to use that module for initialization and not a new module. But if the module does not exist in sys.modules then it is to be added to that dict before initialization begins. If an error occurs during loading of the module and it was added to sys.modules it is to be removed from the dict. If an error occurs but the module was already in sys.modules it is left in the dict.

The loader must set several attributes on the module. __name__ is to be set to the name of the module. __file__ is to be the “path” to the file unless the module is built-in (and thus listed in sys.builtin_module_names) in which case the attribute is not set. If what is being imported is a package then __path__ is to be set to a list of paths to be searched when looking for modules and packages contained within the package being imported. __package__ is optional but should be set to the name of package that contains the module or package (the empty string is used for module not contained in a package). __loader__ is also optional but should be set to the loader object that is loading the module.

If an error occurs during loading then the loader raises ImportError if some other exception is not already being propagated. Otherwise the loader returns the module that was loaded and initialized.

When step (1) finishes without raising an exception, step (2) can begin.

The first form of import statement binds the module name in the local namespace to the module object, and then goes on to import the next identifier, if any. If the module name is followed by as, the name following as is used as the local name for the module.

The from form does not bind the module name: it goes through the list of identifiers, looks each one of them up in the module found in step (1), and binds the name in the local namespace to the object thus found. As with the first form of import, an alternate local name can be supplied by specifying “as localname”. If a name is not found, ImportError is raised. If the list of identifiers is replaced by a star ('*'), all public names defined in the module are bound in the local namespace of the import statement..

The public names defined by a module are determined by checking the module’s namespace for a variable named __all__; if defined, it must be a sequence of strings which are names defined or imported by that module. The names given in __all__ are all considered public and are required to exist. If __all__ is not defined, the set of public names includes all names found in the module’s namespace which do not begin with an underscore character ('_'). __all__ should contain the entire public API. It is intended to avoid accidentally exporting items that are not part of the API (such as library modules which were imported and used within the module).

The from form with * may only occur in a module scope. If the wild card form of import — import * — is used in a function and the function contains or is a nested block with free variables, the compiler will raise a SyntaxError.

When specifying what module to import you do not have to specify the absolute name of the module. When a module or package is contained within another package it is possible to make a relative import within the same top package without having to mention the package name. By using leading dots in the specified module or package after from you can specify how high to traverse up the current package hierarchy without specifying exact names. One leading dot means the current package where the module making the import exists. Two dots means up one package level. Three dots is up two levels, etc. So if you execute from . import mod from a module in the pkg package then you will end up importing pkg.mod. If you execute from ..subpkg2 import mod from within pkg.subpkg1 you will import pkg.subpkg2.mod. The specification for relative imports is contained within PEP 328.

importlib.import_module() is provided to support applications that determine which modules need to be loaded dynamically.

6.12.1. future 语句¶

A future statement is a directive to the compiler that a particular module should be compiled using syntax or semantics that will be available in a specified future release of Python. The future statement is intended to ease migration to future versions of Python that introduce incompatible changes to the language. It allows use of the new features on a per-module basis before the release in which the feature becomes standard.

future_statement ::=  "from" "__future__" "import" feature ["as" name]
                      ("," feature ["as" name])*
                      | "from" "__future__" "import" "(" feature ["as" name]
                      ("," feature ["as" name])* [","] ")"
feature          ::=  identifier
name             ::=  identifier

future 语句必须在靠近模块开头的位置出现。可以出现在 future 语句之前行只有:

模块的文档字符串（如果存在），
注释，
空行，以及
其他 future 语句。

The features recognized by Python 2.6 are unicode_literals, print_function, absolute_import, division, generators, nested_scopes and with_statement. generators, with_statement, nested_scopes are redundant in Python version 2.6 and above because they are always enabled.

future 语句在编译时会被识别并做特殊对待：对核心构造语义的改变常常是通过生成不同的代码来实现。新的特性甚至可能会引入新的不兼容语法（例如新的保留字），在这种情况下编译器可能需要以不同的方式来解析模块。这样的决定不能推迟到运行时方才作出。

对于任何给定的发布版本，编译器要知道哪些特性名称已被定义，如果某个 future 语句包含未知的特性则会引发编译时错误。

直接运行时的语义与任何 import 语句相同：存在一个后文将详细说明的标准模块 __future__，它会在执行 future 语句时以通常的方式被导入。

相应的运行时语义取决于 future 语句所启用的指定特性。

请注意以下语句没有任何特别之处:

import __future__ [as name]

这并非 future 语句；它只是一条没有特殊语义或语法限制的普通 import 语句。

Code compiled by an exec statement or calls to the built-in functions compile() and execfile() that occur in a module M containing a future statement will, by default, use the new syntax or semantics associated with the future statement. This can, starting with Python 2.2 be controlled by optional arguments to compile() — see the documentation of that function for details.

在交互式解释器提示符中键入的 future 语句将在解释器会话此后的交互中有效。如果一个解释器的启动使用了 -i 选项启动，并传入了一个脚本名称来执行，且该脚本包含 future 语句，它将在交互式会话开始执行脚本之后保持有效。

参见

PEP 236 - 回到 __future__: 有关 __future__ 机制的最初提议。

6.13. The `global` statement¶

global_stmt ::=  "global" identifier ("," identifier)*

The global statement is a declaration which holds for the entire current code block. It means that the listed identifiers are to be interpreted as globals. It would be impossible to assign to a global variable without global, although free variables may refer to globals without being declared global.

Names listed in a global statement must not be used in the same code block textually preceding that global statement.

Names listed in a global statement must not be defined as formal parameters or in a for loop control target, class definition, function definition, or import statement.

CPython implementation detail: The current implementation does not enforce the latter two restrictions, but programs should not abuse this freedom, as future implementations may enforce them or silently change the meaning of the program.

Programmer’s note: global is a directive to the parser. It applies only to code parsed at the same time as the global statement. In particular, a global statement contained in an exec statement does not affect the code block containing the exec statement, and code contained in an exec statement is unaffected by global statements in the code containing the exec statement. The same applies to the eval(), execfile() and compile() functions.

6.14. The `exec` statement¶

exec_stmt ::=  "exec" or_expr ["in" expression ["," expression]]

This statement supports dynamic execution of Python code. The first expression should evaluate to either a Unicode string, a Latin-1 encoded string, an open file object, a code object, or a tuple. If it is a string, the string is parsed as a suite of Python statements which is then executed (unless a syntax error occurs). [1] If it is an open file, the file is parsed until EOF and executed. If it is a code object, it is simply executed. For the interpretation of a tuple, see below. In all cases, the code that’s executed is expected to be valid as file input (see section 文件输入). Be aware that the return and yield statements may not be used outside of function definitions even within the context of code passed to the exec statement.

In all cases, if the optional parts are omitted, the code is executed in the current scope. If only the first expression after in is specified, it should be a dictionary, which will be used for both the global and the local variables. If two expressions are given, they are used for the global and local variables, respectively. If provided, locals can be any mapping object. Remember that at module level, globals and locals are the same dictionary. If two separate objects are given as globals and locals, the code will be executed as if it were embedded in a class definition.

The first expression may also be a tuple of length 2 or 3. In this case, the optional parts must be omitted. The form exec(expr, globals) is equivalent to exec expr in globals, while the form exec(expr, globals, locals) is equivalent to exec expr in globals, locals. The tuple form of exec provides compatibility with Python 3, where exec is a function rather than a statement.

在 2.4 版更改: Formerly, locals was required to be a dictionary.

As a side effect, an implementation may insert additional keys into the dictionaries given besides those corresponding to variable names set by the executed code. For example, the current implementation may add a reference to the dictionary of the built-in module __builtin__ under the key __builtins__ (!).

Programmer’s hints: dynamic evaluation of expressions is supported by the built-in function eval(). The built-in functions globals() and locals() return the current global and local dictionary, respectively, which may be useful to pass around for use by exec.

Footnotes

[1]	Note that the parser only accepts the Unix-style end of line convention. If you are reading the code from a file, make sure to use universal newlines mode to convert Windows or Mac-style newlines.

6. 简单语句¶

6.1. 表达式语句¶

6.2. 赋值语句¶

6.2.1. 增强赋值语句¶

6.3. The `assert` statement¶

6.4. The `pass` statement¶

6.5. The `del` statement¶

6.6. The `print` statement¶

6.7. The `return` statement¶

6.8. The `yield` statement¶

6.9. The `raise` statement¶

6.10. The `break` statement¶

6.11. The `continue` statement¶

6.12. The `import` statement¶

6.12.1. future 语句¶

6.13. The `global` statement¶

6.14. The `exec` statement¶

Table of Contents

上一个主题

下一个主题

本页

6. 简单语句¶

6.1. 表达式语句¶

6.2. 赋值语句¶

6.2.1. 增强赋值语句¶

6.3. The assert statement¶

6.4. The pass statement¶

6.5. The del statement¶

6.6. The print statement¶

6.7. The return statement¶

6.8. The yield statement¶

6.9. The raise statement¶

6.10. The break statement¶

6.11. The continue statement¶

6.12. The import statement¶

6.12.1. future 语句¶

6.13. The global statement¶

6.14. The exec statement¶

6.3. The `assert` statement¶

6.4. The `pass` statement¶

6.5. The `del` statement¶

6.6. The `print` statement¶

6.7. The `return` statement¶

6.8. The `yield` statement¶

6.9. The `raise` statement¶

6.10. The `break` statement¶

6.11. The `continue` statement¶

6.12. The `import` statement¶

6.13. The `global` statement¶

6.14. The `exec` statement¶