Module java.base
Package javax.net.ssl

Class SSLServerSocket

  • All Implemented Interfaces:
    Closeable, AutoCloseable
    public abstract class SSLServerSocket
extends ServerSocket
    This class extends ServerSocket and provides secure server sockets using protocols such as the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) protocols.

    Instances of this class are generally created using an SSLServerSocketFactory. The primary function of an SSLServerSocket is to create SSLSockets by accepting connections.

    An SSLServerSocket contains several pieces of state data which are inherited by the SSLSocket at socket creation. These include the enabled cipher suites and protocols, whether client authentication is necessary, and whether created sockets should begin handshaking in client or server mode. The state inherited by the created SSLSocket can be overridden by calling the appropriate methods.

    Since:
    1.4
    See Also:
    ServerSocket, SSLSocket

    • Constructor Detail

      • SSLServerSocket

        protected SSLServerSocket()
                   throws IOException
        Used only by subclasses.

        Create an unbound TCP server socket using the default authentication context.

        Throws:
        IOException - if an I/O error occurs when creating the socket

      • SSLServerSocket

        protected SSLServerSocket​(int port)
                   throws IOException
        Used only by subclasses.

        Create a TCP server socket on a port, using the default authentication context. The connection backlog defaults to fifty connections queued up before the system starts to reject new connection requests.

        A port number of 0 creates a socket on any free port.

        If there is a security manager, its checkListen method is called with the port argument as its argument to ensure the operation is allowed. This could result in a SecurityException.

        Parameters:
        port - the port on which to listen
        Throws:
        IOException - if an I/O error occurs when creating the socket
        SecurityException - if a security manager exists and its checkListen method doesn't allow the operation.
        IllegalArgumentException - if the port parameter is outside the specified range of valid port values, which is between 0 and 65535, inclusive.
        See Also:
        SecurityManager.checkListen(int)

      • SSLServerSocket

        protected SSLServerSocket​(int port,
                          int backlog)
                   throws IOException
        Used only by subclasses.

        Create a TCP server socket on a port, using the default authentication context and a specified backlog of connections.

        A port number of 0 creates a socket on any free port.

        The backlog argument is the requested maximum number of pending connections on the socket. Its exact semantics are implementation specific. In particular, an implementation may impose a maximum length or may choose to ignore the parameter altogther. The value provided should be greater than 0. If it is less than or equal to 0, then an implementation specific default will be used.

        If there is a security manager, its checkListen method is called with the port argument as its argument to ensure the operation is allowed. This could result in a SecurityException.

        Parameters:
        port - the port on which to listen
        backlog - requested maximum length of the queue of incoming connections.
        Throws:
        IOException - if an I/O error occurs when creating the socket
        SecurityException - if a security manager exists and its checkListen method doesn't allow the operation.
        IllegalArgumentException - if the port parameter is outside the specified range of valid port values, which is between 0 and 65535, inclusive.
        See Also:
        SecurityManager.checkListen(int)

      • SSLServerSocket

        protected SSLServerSocket​(int port,
                          int backlog,
                          InetAddress address)
                   throws IOException
        Used only by subclasses.

        Create a TCP server socket on a port, using the default authentication context and a specified backlog of connections as well as a particular specified network interface. This constructor is used on multihomed hosts, such as those used for firewalls or as routers, to control through which interface a network service is provided.

        If there is a security manager, its checkListen method is called with the port argument as its argument to ensure the operation is allowed. This could result in a SecurityException.

        A port number of 0 creates a socket on any free port.

        The backlog argument is the requested maximum number of pending connections on the socket. Its exact semantics are implementation specific. In particular, an implementation may impose a maximum length or may choose to ignore the parameter altogther. The value provided should be greater than 0. If it is less than or equal to 0, then an implementation specific default will be used.

        If address is null, it will default accepting connections on any/all local addresses.

        Parameters:
        port - the port on which to listen
        backlog - requested maximum length of the queue of incoming connections.
        address - the address of the network interface through which connections will be accepted
        Throws:
        IOException - if an I/O error occurs when creating the socket
        SecurityException - if a security manager exists and its checkListen method doesn't allow the operation.
        IllegalArgumentException - if the port parameter is outside the specified range of valid port values, which is between 0 and 65535, inclusive.
        See Also:
        SecurityManager.checkListen(int)

    • Method Detail

      • getEnabledCipherSuites

        public abstract String[] getEnabledCipherSuites()
        Returns the list of cipher suites which are currently enabled for use by newly accepted connections.

        If this list has not been explicitly modified, a system-provided default guarantees a minimum quality of service in all enabled cipher suites.

        Note that even if a suite is enabled, it may never be used. This can occur if the peer does not support it, or its use is restricted, or the requisite certificates (and private keys) for the suite are not available, or an anonymous suite is enabled but authentication is required.

        The returned array includes cipher suites from the list of standard cipher suite names in the JSSE Cipher Suite Names section of the Java Cryptography Architecture Standard Algorithm Name Documentation, and may also include other cipher suites that the provider supports.

        Returns:
        an array of cipher suites enabled
        See Also:
        getSupportedCipherSuites(), setEnabledCipherSuites(String [])

      • setEnabledCipherSuites

        public abstract void setEnabledCipherSuites​(String[] suites)
        Sets the cipher suites enabled for use by accepted connections.

        The cipher suites must have been listed by getSupportedCipherSuites() as being supported. Following a successful call to this method, only suites listed in the suites parameter are enabled for use.

        Suites that require authentication information which is not available in this ServerSocket's authentication context will not be used in any case, even if they are enabled.

        Note that the standard list of cipher suite names may be found in the JSSE Cipher Suite Names section of the Java Cryptography Architecture Standard Algorithm Name Documentation. Providers may support cipher suite names not found in this list or might not use the recommended name for a certain cipher suite.

        SSLSockets returned from accept() inherit this setting.

        Parameters:
        suites - Names of all the cipher suites to enable
        Throws:
        IllegalArgumentException - when one or more of ciphers named by the parameter is not supported, or when the parameter is null.
        See Also:
        getSupportedCipherSuites(), getEnabledCipherSuites()

      • getSupportedCipherSuites

        public abstract String[] getSupportedCipherSuites()
        Returns the names of the cipher suites which could be enabled for use on an SSL connection.

        Normally, only a subset of these will actually be enabled by default, since this list may include cipher suites which do not meet quality of service requirements for those defaults. Such cipher suites are useful in specialized applications.

        The returned array includes cipher suites from the list of standard cipher suite names in the JSSE Cipher Suite Names section of the Java Cryptography Architecture Standard Algorithm Name Documentation, and may also include other cipher suites that the provider supports.

        Returns:
        an array of cipher suite names
        See Also:
        getEnabledCipherSuites(), setEnabledCipherSuites(String [])

      • getEnabledProtocols

        public abstract String[] getEnabledProtocols()
        Returns the names of the protocols which are currently enabled for use by the newly accepted connections.

        Note that even if a protocol is enabled, it may never be used. This can occur if the peer does not support the protocol, or its use is restricted, or there are no enabled cipher suites supported by the protocol.

        Returns:
        an array of protocol names
        See Also:
        getSupportedProtocols(), setEnabledProtocols(String [])

      • setEnabledProtocols

        public abstract void setEnabledProtocols​(String[] protocols)
        Controls which particular protocols are enabled for use by accepted connections.

        The protocols must have been listed by getSupportedProtocols() as being supported. Following a successful call to this method, only protocols listed in the protocols parameter are enabled for use.

        SSLSockets returned from accept() inherit this setting.

        Parameters:
        protocols - Names of all the protocols to enable.
        Throws:
        IllegalArgumentException - when one or more of the protocols named by the parameter is not supported or when the protocols parameter is null.
        See Also:
        getEnabledProtocols(), getSupportedProtocols()

      • setUseClientMode

        public abstract void setUseClientMode​(boolean mode)
        Controls whether accepted connections are in the (default) SSL server mode, or the SSL client mode.

        Servers normally authenticate themselves, and clients are not required to do so.

        In rare cases, TCP servers need to act in the SSL client mode on newly accepted connections. For example, FTP clients acquire server sockets and listen there for reverse connections from the server. An FTP client would use an SSLServerSocket in "client" mode to accept the reverse connection while the FTP server uses an SSLSocket with "client" mode disabled to initiate the connection. During the resulting handshake, existing SSL sessions may be reused.

        SSLSockets returned from accept() inherit this setting.

        Parameters:
        mode - true if newly accepted connections should use SSL client mode.
        See Also:
        getUseClientMode()

      • getUseClientMode

        public abstract boolean getUseClientMode()
        Returns true if accepted connections will be in SSL client mode.
        Returns:
        true if the connection should use SSL client mode.
        See Also:
        setUseClientMode(boolean)

      • setEnableSessionCreation

        public abstract void setEnableSessionCreation​(boolean flag)
        Controls whether new SSL sessions may be established by the sockets which are created from this server socket.

        SSLSockets returned from accept() inherit this setting.

        Parameters:
        flag - true indicates that sessions may be created; this is the default. false indicates that an existing session must be resumed.
        See Also:
        getEnableSessionCreation()

      • getEnableSessionCreation

        public abstract boolean getEnableSessionCreation()
        Returns true if new SSL sessions may be established by the sockets which are created from this server socket.
        Returns:
        true indicates that sessions may be created; this is the default. false indicates that an existing session must be resumed
        See Also:
        setEnableSessionCreation(boolean)

      • getSSLParameters

        public SSLParameters getSSLParameters()
        Returns the SSLParameters in effect for newly accepted connections. The ciphersuites and protocols of the returned SSLParameters are always non-null.
        Returns:
        the SSLParameters in effect for newly accepted connections
        Since:
        1.7
        See Also:
        setSSLParameters(SSLParameters)

      • setSSLParameters

        public void setSSLParameters​(SSLParameters params)
        Applies SSLParameters to newly accepted connections.

        This means:

        • If params.getCipherSuites() is non-null, setEnabledCipherSuites() is called with that value.
        • If params.getProtocols() is non-null, setEnabledProtocols() is called with that value.
        • If params.getNeedClientAuth() or params.getWantClientAuth() return true, setNeedClientAuth(true) and setWantClientAuth(true) are called, respectively; otherwise setWantClientAuth(false) is called.
        • If params.getServerNames() is non-null, the socket will configure its server names with that value.
        • If params.getSNIMatchers() is non-null, the socket will configure its SNI matchers with that value.
        Parameters:
        params - the parameters
        Throws:
        IllegalArgumentException - if the setEnabledCipherSuites() or the setEnabledProtocols() call fails
        Since:
        1.7
        See Also:
        getSSLParameters()